Look forward to a new and improved cooking experience with your purchase of the AGTE91BL, an SIA cooker hood from our latest range. Built with high quality materials, this cooker hood ensures excellent performance standards are achieved with every use. Its stunning black design boasts elegance in your kitchen, adding a contemporary look to your kitchen décor scheme.
Included as part of the products design are:
A 4-layered aluminium grease filter
Two 1W LED lamps
One 3W LED edge lighting, and…
3-speed push button controls
The 4 layer aluminium grease filter collects particles of grease as the appliance draws in air, so it doesn’t build up in your kitchen or the cooker hood. Simply pop the grease filter into the dish-
washer and re-use! In addition, the 3-speed touch control buttons allow for an easy way to keep your kitchen steam and odour free*. Simply opt for a higher or lower extraction power,
depending on what you’re cooking on the hob below, and be wowed by the results you’ll achieve in minutes!
This cooker hood comes with the SIA D1 125mm x 1m ducting kit so you have everything you need to set it up for external extraction. The ducting kit is used to channel odours, steam
and smoke straight outside keeping your kitchen clean and fresh. The appliance can be used for internal re-circulation however carbon filters would need to be purchased separately.
And it doesn’t stop there…
The choice of 1W LED lamps and the 3W LED edge lighting, which comes in red, blue and green, allows you to benefit from the best of both worlds.
Shed a bright light over your cooking area together with creating an ambient glow in your kitchen, and be wowed by stunning results and…
The 5 year parts 2 year labour guarantee ensures total customer satisfaction is achieved for years to come
Ducted or recirculating installation
4 Layer aluminium grease filter
Touch control design
Dishwasher proof grease filters
2 x 1W LED Lamp
1 x 3W LED edge lighting (Separate button for edge lighting)
Operating modes: extraction & re-circulation
Telescopic chimney sections
Timer mode can be activated to keep the fan running for fifteen minutes
D1 external ducting kit included with this purchase
Please ensure there is enough ceiling height to accommodate the clearance needed between
the appliance and the hob. Required height over gas & electric hob: 550mm (please note that if
the hob manual states the clearance must be greater than 550mm, this will override these instructions)
Noise level: 66 dBA
Extraction rate: 550 m3/hr (max)
Rated electrical voltage: 230-240V
Dimensions (WxDxH): 900mm x 303mm x 780mm-1080mm
Air outlet diameter: 125mm
Height of chimney sections: 400mm+330mm
Mains lead length: 1m
*Charcoal filters and a re-circulated installation will not
remove steam from kitchens but will neutralise odours.